Vulcan VSPH User Manual download pdf (Page 3)

– 3 –

Installation, Operation and Care of

Vegetable Slicer Attachment

SAVE THESE INSTRUCTIONS

GENERAL

The Vegetable Slicer uses are many and varied: cutting cabbage for salads and cole slaw, slicing potatoes

ranging in thickness from that of a potato chip to

⁄8", slicing nuts, bananas, cucumbers, celery and other

vegetables and fruits, and shredding or grating cheese, raw carrots, beets, etc.

The food is sliced by stainless steel scimitar knives for fast, clean, uniform cutting. The front of the Vegetable

Slicer is hinged at one side, and can be swung aside or removed, permitting quick and easy changing of

plates and cleaning.

The Vegetable Slicer Attachment includes back case, feed hopper, plate holder and

/16" shredder plate.

Optional accessories are the adjustable slicer plate and other size shredder plates and a grater plate.

The Vegetable Slicer may also be used with Power Drive units.

INSTALLATION

UNPACKING

Immediately after unpacking the vegetable slicer, check for possible shipping damage. If the vegetable slicer

is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

BACK CASE

The back case (Fig. 1) mounts into the

attachment hub of a mixer, chopper,

food cutter, or power drive and is

retained by a thumb screw of that

machine. It is available with a #12

size hub.

FEED HOPPER

The standard front is the feed hopper

and pusher lever (Fig. 1) feed design. It

hinges onto the back case and is held

with a latch (Fig. 1). To remove front,

lift latch, swing front open, and raise

from hinge holes. The pusher lever is

held in the feed hopper by a large pin.

To remove pull the pin ring.

LATCH

PLUNGER

BACK CASE

FEED HOPPER

PUSHER

LEVER

Fig. 1

1 2 3 4 5 6 7 8

No comments

Vulcan VSPH User Manual Page 3