Vulcan VPT7 User Manual download pdf (Page 8)

VPT SERIES - FOOD HOLDING & TRANSPORT F-39456 (1-13)

HOLDING OPERATING INSTRUCTIONS

Always uncoil power

cord and remove from cord wrap

when plugging cord in power source.

Once the cabinet has been connected to

the appropriate power source, the

cabinet is ready for operation.

1. Begin by turning the thermostat

dial to the number 5. This will

cause the heating element(s) to

start heating. Once the red light

is lit, the thermostat dial can be

turned to the desired setting.

The circulating fan will engage after

approximately 1 to 2 minutes of

operation.

2. Wait approximately 25 minutes

for the cabinet to preheat.

3. Load Hot food pans with hot,

cooked food into cabinet.

This cabinet is not intended to reheat

or cook food. Food must be cooked

and at a safe serving temperature

prior to being placed in the cabinet

The operator should always monitor the food product to insure that it remains at

a proper temperature.

HOLDING SHUTDOWN

When the use of the holding cabinet is

completed:

The Cabinet and its

parts are HOT. Be very careful when

operating, cleaning, or servicing the

cabinet.

1. Turn the thermostat to the Off

position.

The circulating fan will continue to

operate until the cool down period is

complete. Do not unplug cabinet

until the circulating fan has stopped

operating.

2. Allow cabinet to cool down

completely.

3. Unplug power cord.

4. Clean cabinet according to

instructions in this manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Vulcan VPT7 User Manual Page 8

Comments to this Manuals

Related products and manuals for Kitchen Vulcan VPT7