Vulcan VCH5 User Manual download pdf (Page 11)

VCH & VRT SERIES OVENS F-41162 (03-14)

10

PRE-PROGRAMMED CYCLES

The Oven can be programmed for 9

cooking/holding cycles. (P-1 thru P-9)

To program each cycle, P-1 through P-

9, use the following instructions.

PROGRAMMING:

From the “Idle State” while the Time is

blinking:

1. Press and Hold the ADJ/SET

Button for 3 seconds. The time

will no longer blink.

The Cabinet Temp. will display

“P-0” and is blinking. Turn

Adj/Set knob to display P-1, go to

step 3.

2. If P-2 through 9 is the desired

cycle, Rotate the ADJ/SET

Knob to the desired pre-

programmed cycle.

3. Press and Hold the ADJ/SET

Knob for 3 seconds.

Time will start blinking.

4. Rotate the ADJ/SET Knob to

desired time.

5. Press the ADJ/SET Knob to

accept the time.

Cook Temp. will start blinking.

6. Rotate the ADJ/SET Knob to

desired cooking temperature.

7. Press the ADJ/SET Knob to

accept Cook Temp.

Hold Tem. will start blinking.

8. Rotate the ADJ/SET Knob to

desired holding temperature.

9. Press the ADJ/SET Knob to

accept Hold Temp.

10. Push Start Button

OPERATING:

1. Switch ON/OFF Switch to ON.

During the “Idle State/Time is blinking”:

2. Press and Hold the ADJ/SET

Knob for 3 seconds. The time

will no longer blink.

The Cabinet Temp. will display

“P-1” and is blinking.

3. Rotate ADJ/SET Knob to

desired pre-programmed cycle:

P-1 through 9.

4. Press Start Button.

You can push the ADJ/SET Knob any

time to abort the cycle and return to idle.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments