Vulcan C24EA6 User Manual download pdf (Page 4)

MODEL C24EA - GENERAL

F35453 (July 2008) Page 4 of 68

Other chemical properties in water supplies can also

affect good steam generation and vary from within

each state and locality.

The water level probes in the steam generator use

ions in the water to detect the water level. Do not use

fully demineralized or de-ionized water since it is

non-conductive and the water level can not be

detected.

NOTE: The use of strainers, or filters will not remove

minerals from the water.

Steamers that operate over a long period of time

without the benefit of properly conditioned water, and

have developed a heavy scale build up, should be

cleaned before connecting to a conditioned water

supply.

REFERENCE MATERIAL

For replacement parts, refer to Catalog of

Replacement Parts F35454.

For operation, cleaning and maintenance

instructions, refer to Installation and Operation

Manual F35430.

LUBRICATION

Component Lubrication Type

All NPT Fittings Pipe Thread Sealant, Loctite 565

Door Handle

Sliding Bracket

Lubriplate 630AA

TOOLS

• Standard set of hand tools.

• VOM with A/C current tester (any quality VOM

with a sensitivity of at least 20K ohms per volt

can be used).

• Anti Static Kit, Part No. TL - 84919.

Special

• Torque Wrench - Capable of measuring

70 in-lbs.

• Aluminum Foil Tape - (McMaster-Carr Part No.

7631A21) or equivalent.

• Single use Constant Tension Band Clamps for

the specific hose size being used. Refer to parts

catalog for part number.

• Pressure Gauge Assembly

• Low Pressure Gauge - 0 to 5 psi.

recommended (Grainger Part No. 2C641).

• Water Hose Coupling - swivel type

(Grainger Part No. 4KG87).

• Reducer Bushing (Grainger Part No.

6MN61).

• Pipe thread sealant (as required).

1 2 3 4 5 6 7 8 9 ... 67 68

Comments to this Manuals

No comments

Vulcan C24EA6 User Manual Page 4

Comments to this Manuals