Vulcan C24EA6 User Manual download pdf (Page 9)

MODEL C24EA - DOOR

F35453 (July 2008)Page 9 of 68

LATCH ASSEMBLY

Removal and Disassembly

1. Separate outer door housing assembly from

inner door panel as outlined under DOOR

HANDLE.

2. Remove screws securing latch assembly to

inner door panel and remove latch mechanism.

3. Remove E-clip from latch assembly pins and

pull pins from latch mechanism.

4. Remove retaining pin from spring pin.

5. Separate sliding bracket from stationary

bracket.

Assembly

1. Apply Lubriplate 630AA to sides of sliding

bracket.

2. Insert spring pin into bottom of sliding bracket.

A. Place spring over spring pin.

3. Assemble sliding bracket into stationary

bracket.

4. While holding head of spring pin against bottom

of sliding bracket, insert spring pin into keeper

hole in bottom of stationary bracket.

A. Secure spring pin in place with retaining

pin.

NOTE: Install pins such that heads of pins will be

facing inward toward hinge side of inner door panel

when latch assembly is installed.

5. Install pins to assemble stationary and sliding

brackets together.

A. Secure pins into position with E-clip.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

No comments

Vulcan C24EA6 User Manual Page 9