Vulcan K20EL User Manual download pdf (Page 6)

Bottom

HEATING CONTACTORS

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

1. Remove

CONTROL BOX COVER.

2. Note location of lead wires then disconnect the

wires from contactor being replaced.

3. Remove screws securing the contactor to panel.

4. Reverse procedure to install and check for proper

operation.

Fig. 7

TEMPERATURE CONTROLLER

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

1. Remove CONTROL BOX COVER.

2. Disconnect lead wires from temperature

controller.

3. Remove screws securing the temperature

controller to panel.

4. Reverse procedure to install and check for proper

operation.

Fig. 8

WATER LEVEL CONTROL

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

1. Remove CONTROL BOX COVER.

2. Disconnect lead wires from the water level

control.

3. Remove screws securing the water level control

to panel.

4. Reverse procedure to install and check for proper

operation.

Electric Stationary and Tilting Kettles - REMOVAL AND REPLACEMENT OF PARTS

F45472 (1112) Page 6 of 29

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

No comments

Vulcan K20EL User Manual Page 6