Vulcan VG30 User Manual download pdf (Page 8)

– 8 –

VG30, VG40, VE30 & VE40 BRAISING PANS

ELECTRICAL CONNECTIONS (See Fig. 2)

Disconnect the electrical power to the machine and follow

Lockout / Tagout procedures.

Appliances equipped with a flexible electric supply cord are provided with a

three-prong grounding plug. It is imperative that this plug be connected into a properly

grounded three-prong receptacle. If the receptacle is not the proper grounding type, contact an

electrician. do not remove the grounding prong from this plug.

Electrical and grounding connections must comply with the national electrical

code and/or other local codes.

The field connection box for field wire connection of Models VE30 and VE40 is located at the back of

the braising pan. A knockout hole is provided for a 1" (2.5 cm) conduit connection.

1. Remove the field connection box cover plate. Mount suitable 1" (2.5 cm) conduit fitting in the

conduit opening provided on the bottom surface.

2. Connect field wire to the terminal block as indicated on the wiring diagram. The wiring diagram

is located on the inside of the field box lid. Wire must be of the type suitable for 75°C service and

at the suitable gauge for loads shown on the data plate.

3. After making the connections, replace the control box cover plate.

4. The braising pan must be grounded by installing a properly grounded lead to the ground lug

located inside the field connection box.

5. The electronic ignition used to light the burners require proper grounding.

These values are nominal ratings. Field wire connections must be capable of withstanding anticipated

surges.

TRAHCATADLACIRTCELE

STLOVESAHP

03EV04EV

.W.KPMA.W.KXLYLZL

8021934218585—

04212105617676—

802395221939352

0423219261646492

0843215161323251

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Vulcan VG30 User Manual Page 8