Vulcan VCH5 User Manual download pdf (Page 14)

VCH & VRT SERIES OVENS F-41162 (03-14)

13

To prevent stainless steel break-

down, follow these steps:

1. Never use any metal tools,

scrapers, files, wire brushes,

or scouring pads (except for

stainless steel scouring pads,)

which will mar the surface.

2. Never use steel wool – which

will leave behind particles that will

rust.

3. Never use acid-based or

chloride containing cleaning

solutions – which will break

down the protective film.

4. Never rub in a circular motion.

Always rub gently in the direction

of the steel grain.

5. Never leave any food products

or salt on the surface. Many

foods are acidic. Salt contains

chloride.

PRESERVING & RESTORING:

Special stainless steel polishing

cleaners can preserve and restore the

protective film.

Preserve the life of stainless steel with a

regular application of a high-quality

stainless steel polishing cleaner, as a

final step to daily cleaning.

If signs of breakdown appear, restore

the stainless steel surface. First,

thoroughly clean, rinse, and dry the

surface. Then, on a daily basis, apply a

high-quality stainless steel polish

according to manufacturer’s instructions.

HEAT TINT:

Darkened areas, called “heat tint,” may

appear on stainless steel exposed to

excessive heat. Excessive heat causes

the protective film to thicken. This is

unsightly, but is not a sign of permanent

damage.

To remove heat tint, follow the routine

cleaning procedure. Stubborn heat tint

will require heavy-duty cleaning. To

reduce heat tint, limit the exposure of

equipment to excessive heat.

DOOR GASKET CARE

DOOR GASKET:

At least once a week, thoroughly check

the door gasket for damage/wear. A

damaged gasket can cause inefficient

and unsatisfactory operation of the

oven.

If the gasket requires cleaning:

1. Gently wash gasket using a

moist cloth, a mild detergent

solution, and warm water.

2. Rinse with a fresh cloth

moistened in warm water to

remove all traces of detergent.

3. Gently wipe dry with a clean dry

cloth.

Never apply food oils, or petroleum

lubricants directly to the gasket(s).

Petroleum based solvents and

lubricants will reduce the gasket’s life.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments