Vulcan 24RRG User Manual download pdf (Page 10)

Fig. 15

7. Remove the three NPT elbows. Two on front and

one on the back of dual solenoid valve.

NOTE: Be sure to note positioning of NPT elbows on

dual solenoid valve.

8. Reverse proceedure for installation.

NOTE: When installing solenoid valves be sure that

the coil valve clamp is placed correctly and that the

valve clamp hold down nut is securely tightened.

Clean pipe threads and apply thread

sealant that is suitable for use with propane gases.

9. Check for proper operation.

SINGLE SOLENOID VALVE

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

Shut off the gas before servicing the

unit.

All gas joints disturbed during

servicing must be checked for leaks. Check with a

soap and water solution (bubbles). Do not use an open

flame.

1. Remove

CONTROL PANEL.

NOTE: Plumbing and type of Single Solenoid Valve

may vary slightly between different units.

2. Label and disconnect connectors on single

solenoid valve.

3. Remove retaining screws that are holding single

solenoid valve body in bracket.

4. Disconnect compression fitting and remove flex

tubing from front of single solenoid valve.

Fig. 16

5. Lift solenoid out of bracket and arrange it to

access compression fitting in back of single

solenoid valve.

6. Disconnect compression fitting in back of single

solenoid valve.

7. Remove street elbow and NPT elbow from single

solenoid valve.

Fig. 17

NOTE: Be sure to note the positioning of the elbow.

8. Reverse proceedure for installation.

Clean pipe threads and apply thread

sealant that is suitable for use with propane gases.

9. Check for proper operation.

RRG SERIES HEAVY DUTY GAS GRIDDLE - REMOVAL AND REPLACEMENT OF PARTS

F45514 (0214) Page 10 of 24

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Vulcan 24RRG User Manual Page 10

Comments to this Manuals

Related products and manuals for Grills Vulcan 24RRG