Vulcan 24RRG User Manual download pdf (Page 8)

2. Access ignition module, and disconnect high

voltage spark wire.

Fig. 9

3. Remove CONTROL PANEL.

4. Lift griddle at the front and support it from

underneath for access to the pilot. (Be aware of

the main gas line at the rear when tilting)

5. Remove pilot bracket retaining screw.

Fig. 10

6. Position pilot assembly to give you the easiest

access to the compression fitting on the pilot

assembly.

Fig. 11

7. Disconnect flex tubing from pilot burner

assembly.

8. Pull high voltage spark wire through bottom of

griddle.

9. Reverse procedure to install.

NOTE: When installing, verify spark gap is 1/8".

10. Check for proper operation.

IGNITION MODULE

Disconnect the

electrical power to the machine and

follow lockout / tagout procedures.

1. Remove grease tray

2. Remove two screws holding ignition module

cover in place and pull it down.

RRG SERIES HEAVY DUTY GAS GRIDDLE - REMOVAL AND REPLACEMENT OF PARTS

F45514 (0214) Page 8 of 24

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Vulcan 24RRG User Manual Page 8